
Cold Water Dive Gear for Canada
Cold water dive gear decides whether a Canadian dive is a pleasure or an ordeal. This guide covers what keeps you warm and safe in water that is often 4 to 10 °C: the drysuit and what goes under it, hoods and gloves, regulators for the cold, weighting, and what to wear after you surface.
Drysuit or wetsuit?
A wetsuit keeps you warm by trapping a thin layer of water that your body heats. In water below about 10 °C that stops working well, especially on long or repeated dives, and it gets worse with depth as the neoprene compresses. A drysuit keeps you dry and lets you wear insulating layers underneath, so it is the standard for diving in Canada.
Some divers still use a 7 mm wetsuit or semi-dry suit with a hood and gloves for short, shallow dives in late summer, when the surface layer in the Great Lakes or a sheltered B.C. bay warms up. For most dives, and certainly for wrecks below the thermocline, plan on a drysuit, and take a drysuit course before you use one. Our page on choosing a Canada dive shop explains how to find training and rentals.
Choosing a drysuit
Trilaminate shell
A thin, light shell that does not compress with depth. Warmth comes entirely from the undergarment, so it suits travel and a wide range of temperatures.
Neoprene or crushed neoprene
The suit itself insulates. Crushed neoprene changes little with depth; standard neoprene is warm at the surface but loses buoyancy and warmth as it compresses.
Seals and boots
Latex or silicone neck and wrist seals keep water out. Fit them carefully: a seal that is too tight is uncomfortable, and one that is too loose leaks.
Whatever the shell, fit is everything. You need room to move, reach your valves and fins, and wear your undergarment without the suit pulling tight across your shoulders.
Undergarments: where the warmth comes from
Under a drysuit, layer like you would for winter outdoors. Start with a thin base layer that moves moisture away from your skin, then a thicker fleece or purpose-made undersuit. Avoid cotton, which stays cold when damp. Thicker layers are warmer but need more weight and more air in the suit, so match the undergarment to the water and the dive. Warm, dry socks matter more than most divers expect.
Hoods, gloves and the face
Your head loses heat quickly, so wear a thick hood, often 7 mm or more, that seals well around the face. For hands, divers choose between thick wet gloves (5 to 7 mm), three-finger mitts that keep fingers together for warmth, and dry gloves that attach to the suit with ring systems and allow liners underneath. Dry gloves are warmest; mitts are a good middle ground. Whatever you choose, practise working your inflator, dump valve and clips with them on.
Regulators built for the cold
Very cold water can make a regulator free-flow when ice forms in the first or second stage. A regulator rated for cold water, often with an environmentally sealed first stage, is much less likely to do this. For cold dives, many divers carry two independent first stages on separate valves so one can be shut down if it free-flows. Avoid purging or breathing from the regulator in freezing air before the dive, and keep it out of the wind until you are ready to go in.
Train for it. A drysuit course covers buoyancy, suit inflation and what to do if a valve sticks or a seal leaks. Ice diving and very cold water need their own specialty training on top of that.
Weighting in fresh and salt water
A drysuit and thick undergarment need more lead than a wetsuit, so do a weight check at the start of every trip. Fresh water is less buoyant than salt water, so you need less weight on a Great Lakes wreck in Tobermory than in the Pacific off British Columbia. Use the suit only to stay comfortable, not as your main buoyancy device, and keep enough weight in places you can drop it in an emergency.
Small items that matter
A primary light and a backup help in green, low-light water and on wrecks. A cutting tool deals with kelp and fishing line. A surface marker buoy is essential wherever there are currents or boat traffic. A compass helps on featureless shore dives, and a spare hood and pair of gloves saves the day if one floods.
After the dive
Cold diving does not end when you surface. Change out of damp layers quickly, put on a windproof jacket and a warm hat, and drink something warm. Bring a bag or tub for wet gear and towels for the car, and rinse and dry everything before the next dive.
Frequently asked questions
What thickness of wetsuit can I use in Canada?
If you dive wet at all, use at least a 7 mm suit with a hood and gloves, and only for short summer dives in shallow water. A drysuit is the better choice for almost all Canadian diving.
Should I buy or rent a drysuit?
Rent first, with a drysuit course, to learn what fit and style you like. If you dive in Canada regularly, a suit that fits you well is worth owning.
Why do regulators free-flow in cold water?
As air expands through the regulator it cools, and in very cold water moisture can freeze and hold a valve open. Cold-rated regulators and careful handling reduce the risk.


